Flake Epoxy Garage Floor in Meridian, Idaho

Meridian Quality Epoxy Floors installs flake epoxy garage floor systems in Meridian. The job is a full broadcast of vinyl chip on a profiled slab so broom texture, stains, and daily grit do not read as the finish. Homeowners who park daily drivers want this more than a showpiece swirl.

Text (208) 502-8405 with the stall size and a chip color if you have one. We quote after we see how much grind the floor needs.

Flake Epoxy Garage Floor Options for Meridian Properties

Chip size, broadcast density, and the lock coat change the floor more than the base color in the bucket.

Full-broadcast vinyl chip floors

We throw chip until no body coat shows. That is rejection. The floor then gets scraped, vacuumed, and locked with a clear coat. This is the default on production two-car bays in Tuscany and along Ten Mile. Partial broadcast leaves islands of color that wear first at the tire tracks.

Quarter-inch versus eighth-inch chip

Quarter-inch flake reads as a terrazzo from a few feet away. Eighth-inch packs tighter and hides more of the grind. Mixed sizes exist. We do not mix sizes on the same stall unless you ask. Stair noses and the door threshold take the same blend so the floor does not change species at the edge.

Color-blend flake for south Meridian

Gray-on-gray blends hide dirt on a daily-driver floor. Black-and-tan reads warmer next to beige walls. We dry-lay a sample card on your slab in daylight, not under a shop lamp. HOA rules almost never name a flake blend. They notice gloss at the open door more than the chip.

Flake plus polyaspartic lock coat

The chip sits in epoxy. The lock coat is often polyaspartic because it returns the bay faster and holds UV at the door. A slow urethane is the other wear option when the schedule is not tight. Aluminum oxide in the lock coat adds bite if you want less slip when the floor is wet.

How We Handle Flake Epoxy Garage Floor Jobs in Meridian

1. We confirm blend, chip size, and whether the lock coat is polyaspartic or urethane. The stall is measured and cracks are mapped.
2. We grind, fill, and prime. Broadcast does not start on dust or on laitance.
3. Body coat goes down. Chip is thrown to rejection while the film is wet. We scrape the excess after cure.
4. The lock coat rolls on at the mils that bury the chip without leaving a sticky field. Cars stay out for the posted window.

Materials and Methods

Vinyl chip is a flake, not quartz sand. We buy it by blend and by size, then keep the lot together so a second stall matches. The body coat is 100% solids epoxy so the chip has a film to sit in. Rejection means the floor is covered until extra chip falls off a dry field. A floor scraper knocks the high tips before the lock coat. Vacuuming between scrape and lock keeps nibs out of the clear. Polyaspartic lock coats are aliphatic and UV stable. Urethane lock coats have a longer open time in a cool shop. Aluminum oxide can go in the last pass for traction. Masking at the drywall, the door tracks, and the water-heater pad is part of the job. This list is the flake system, not a metallic pour.

What Flake Epoxy Garage Floor Work Costs in Meridian

HomeAdvisor puts many epoxy floors between $1,650 and $3,493, averaging $2,525. Angi lists decorative flakes as an add-on near $0.04 per square foot for the chip itself, which is not the installed system. Fixr's installed two-car high band sits near $5,750-$8,625. The local number moves with stall size, how much old film we grind off, and whether the lock coat is a fast polyaspartic. We quote the broadcast. We do not sell a per-bag chip price as the job.

Keep a small bag of leftover chip from the lot we used. A later patch on a water-heater move or a door replacement can get close if that bag still exists. Without it, we dry-lay current stock on the floor in daylight and you pick the nearest blend. Do not store leftover chip in a wet corner. Moisture clumps the vinyl and it will not throw clean.

Flake Epoxy Garage Floor Questions

What is a flake epoxy garage floor in a Meridian house?

It is a ground slab, a body coat, then vinyl chip thrown to rejection, then a clear lock coat. The chip hides broom marks, hairlines, and dirt. Most south Meridian two-car bays want this look, not a solid color.

Do I pick 1/4-inch or 1/8-inch chip?

Quarter-inch reads bolder. Eighth-inch reads tighter and hides more of the slab. Blend colors matter more than the brand name on the box. Bring a sample from the house paint if you want the floor to sit next to the walls.

Will flake hide cracks?

It hides hairlines. It does not fix a moving joint. We fill control cuts and patch spalls before the broadcast. If a crack is still working, the chip will bridge it until the slab moves again.

How do I get a flake epoxy garage floor quote?

Call or text with bay size and a photo. Say the blend if you already picked one. We quote after we see the grind need, not off a showroom photo.

Reach us at (208) 502-8405 with a chip card or a photo of a floor you like. We match blend after we see your slab in daylight.